nc_sekar_415
01-27 04:08 PM
Well, I read all the posts on this thread, they seem too cautious and pro employee. My advice to you is
1) People and relationships are more important than money. This is true only if the people are of high moral standard. If your company is going to teach you things (it is generally the case) then be receptive and serve them well. They might give you a raise. If they are prepared to invest in you, you should be prepared to invest in them. This will improve the image of indian workers.
2) The clause you are stating is not very bad. If you own a company and you teach your workers skills, you want something in return. You can avoid complications by making sure to clearly document what you already knew and what has been taught to you.
3) There are things called trade secrets. If the company teaches you these secrets you should not disclose it to others. Otherwise your ass is grass.
4) This is not the same as the 200,000$ bonded contract settlement precedent cited in the thread. It may not apply to your case. This is also not a legal forum. Pay 200$ consulting fees and talk to a lawyer and get advice. Don't loose sleep! and post that response here!!!!
We as immigrants tend to be too cautious. This is good, but it should not be in the way of good relationship with employers. Prepare for the worst and hope for the best!!!
Hi,
I am planning to accept an offer from a company that will also sponsor my H1. All the terms & conditions look fine to me and their seems to be no bond.
However, the offer letter has a clause that is a bit strange and raised some doubts in my mind. Experienced people please comment and let me know if it has a risky hidden meaning. Please note I am not going to take any trainings and would start to work immediately with one of their clients. The clause goes like this.
"Employee acknowledges that the Company may invest significant sums to train and educate Employee and the Company�s investment in Employee would be jeopardized if Employee were to leave the company�s employment prior to the Company�s receipt of the benefits of such training and education. Employee hereby agrees to refund to the Company all amounts expended by the Company in the immediately preceding 12 months for education or training of the Employee if Employee resigns from the employment with the Company or is terminated by the Company for gross neglect of duty, material breach of the Letter or this Agreement or conviction or plea of guilty or no contests to a felony. Employee authorizes the Company to deduct and withhold such payment in full from any compensation or other amounts otherwise owed or payable to Employee. The payments will be due within 30 days of
termination of the employment."
1) People and relationships are more important than money. This is true only if the people are of high moral standard. If your company is going to teach you things (it is generally the case) then be receptive and serve them well. They might give you a raise. If they are prepared to invest in you, you should be prepared to invest in them. This will improve the image of indian workers.
2) The clause you are stating is not very bad. If you own a company and you teach your workers skills, you want something in return. You can avoid complications by making sure to clearly document what you already knew and what has been taught to you.
3) There are things called trade secrets. If the company teaches you these secrets you should not disclose it to others. Otherwise your ass is grass.
4) This is not the same as the 200,000$ bonded contract settlement precedent cited in the thread. It may not apply to your case. This is also not a legal forum. Pay 200$ consulting fees and talk to a lawyer and get advice. Don't loose sleep! and post that response here!!!!
We as immigrants tend to be too cautious. This is good, but it should not be in the way of good relationship with employers. Prepare for the worst and hope for the best!!!
Hi,
I am planning to accept an offer from a company that will also sponsor my H1. All the terms & conditions look fine to me and their seems to be no bond.
However, the offer letter has a clause that is a bit strange and raised some doubts in my mind. Experienced people please comment and let me know if it has a risky hidden meaning. Please note I am not going to take any trainings and would start to work immediately with one of their clients. The clause goes like this.
"Employee acknowledges that the Company may invest significant sums to train and educate Employee and the Company�s investment in Employee would be jeopardized if Employee were to leave the company�s employment prior to the Company�s receipt of the benefits of such training and education. Employee hereby agrees to refund to the Company all amounts expended by the Company in the immediately preceding 12 months for education or training of the Employee if Employee resigns from the employment with the Company or is terminated by the Company for gross neglect of duty, material breach of the Letter or this Agreement or conviction or plea of guilty or no contests to a felony. Employee authorizes the Company to deduct and withhold such payment in full from any compensation or other amounts otherwise owed or payable to Employee. The payments will be due within 30 days of
termination of the employment."
wallpaper images wallpaper real madrid vs barcelona live real madrid vs barcelona 2011
ramreddy
01-31 05:08 AM
Ms Su of TVU....why would someone stoop so low and looks like she became a convenient scapegoat for the students ..? not sure what'd you think. She has a Phd from UC Berkley and a patent on her name ....several publications.
I dug up her resume...
Dr. Susan Xiao-Ping Su
President of Tri-Valley University
Tri-Valley University TVU (http://trivalleyuniversity.org)
E-mail: ssu@trivalleyuniversity.org, su123@sbcglobal.net
EDUCATION
Ph .D. Department of Mechanical Engineering, University of California at Berkeley, 2001.
Major: Design; Minor I: Microscale Heat Transfer; Minor II: Integrated Circuit Technology.
Dissertation: Compliant Microleverage Mechanism Design for MEMS Application
Dissertation Advisors: Prof. Alice M. Agogino; Prof. Tsu-Jae King, Prof. Dennise K. Lieu
M. S. Department of Mechanical and Aeronautical Engineering, University of California at Davis, 1997. Major: Design
Thesis: Computer-Aided Kinematic and Dynamic Analysis of Spatial Mechanisms
Thesis Advisors: Prof. Harry H. Cheng; Prof. Bahram Ravani; Prof. An T. Yang (Emeritus)
B. S. Department of Engineering Mechanics, Tsinghua University, China, 1991.
Major Field of Study: Fluid Mechanics
WORK EXPERIENCE
1. President and Founder, Semiconductor System Integration, Pleasanton, 2003-present
� Consultant for Phosistor Technology, Pleasanton, on Semiconductor Device Fabrication, Development of photonic component (laser and OPM) process, Oxford Plasmalab DRIE and ICP etching of SiO2 for Optical MEMS devices.
� Consultant for California Micro Device on Chip-Scale-Packaging strengthen mechanism;
� Consultant for NASA on nano chemical sensor fabrication.
� High-density Magnetic Random Access Memory Development
2. Lecturer, HerGuan University, Sunnyvale, 2007
EE537 Analog IC Design, EE515 & 516 VLSI I & II
3. Lecturer, San Jose State University, San Jose, CA, Fall 2004-2006
EE178 Digital System Design with FPGA, ME 101 Dynamic
4. Lecturer, San Francisco State University, San Francisco, CA, 2004-2005;
ENGR 890 Design of MEMS; Design of CMOS Memory Circuit
ENGR 356 Computer Architecture; ENGR378 Digital System Design with Verilog.
5. Lecturer, International Technological University, Santa Clara, CA, 2004-2007
EEN967 Analog IC Design; EE 519 CMOS Memory Circuit Design; EE 511 VlSI I, II;
EEN 923 & 910 Semiconductor Physics & Devices; EEN 918 IC Fabrication Technology.
6. Lecturer, Northwestern Polytechnic University, Fremont, CA, 9/2002 -2004
EE 507 Analog IC Design; EE 520 CMOS Memory Circuit Design;
EE 506 VLSI II; EE 624 IC Fabrication Technology; EE 581 MEMS/NEMS Design;
Developing MEMS and nanotechnology concentration area curriculum.
7. Member of Technical Staff, Project manager, PicoNetics Inc., Fremont, 9/2000-9/2002.
� 256K 100MHz (TSMC 0.25m) and 4M 200MHz SRAM design (0.13m G logic process); RLC circuit for on-chip sin wave generation, sense amplifier fro SRAM, DRAM, Bandgap reference, voltage regulator, PLL circuit design, standard cell library design.
� Supervision of two layout engineers for a 256K SRAM circuit including all technical file set-up, layout optimization for minimum coupling and RC delay, Dracula LVS and Arcadia extraction, LVS and Extraction tools evaluation and memory compliers; UMC and TSMC 0.25, 0.18, 0.15 and 0.13 m process evaluation for SRAM.
8. Graduate Researcher, Berkeley Sensor and Actuator Center (BSAC), and Berkeley Expert Technology System Lab (BEST), U. C. Berkeley, 1996-2000.
� Design, fabrication and testing of a resonant accelerometer (RXL) with on-chip amplifier and two-stage leverage mechanism by the SOI-MEMS integrated process.
� Compliant micro-leverage mechanism design and analysis, FEM analysis and simulation with ABAQUS and SUGAR; Design of the mechanism for force and displacement amplification in other MEMS devices including a micro-valve, an electrostatic actuator and the suspension of the disk drive.
9. Internship, Lawrence Berkeley National Lab, EETD, 6/1999-12/1999.
� Optics programming; SEM and TEM measurements of glass samples.
10. Graduate Researcher, Integrated Engineering and Mechatronics Lab, Dept. of Mechanical and Aeronautical Engineering, UC Davis, 1994-1996
� With Ch program, analysis of velocity and acceleration for 32 spatial mechanisms (4-bar, 5-bar, 6-bar and 7-bar); force and torque analysis of RCCC & RCRCR mechanisms;
� Designed a data acquisition system for PAS machine by communication of an AT-MIO-16F board in Labview.
GRADUATE THESIS ADVISING:
� Yaosong Tao, International Technological University, Ph.D. Thesis: RF MEMS Components for Communication Systems, 2004.
� Leo Huang, Northwestern Polytechnic University, M.S. Thesis, Contacting Printing Lithography for Polymeric Organic Light-Emitting Diode, 2005;
� Sam Shi, International Technological University, M.S. Thesis, A 8-bit Energy Recover Adder, 2005;
� Parthiv Pandya, International Technological University, M.S. Thesis: MRAM Core Cell Design and Optimization, 2004;
� Paisit Sriprataks, International Technological University, M.S. Thesis: MRAM Sensing Circuit Design, 2004;
� Balajee Premraj, International Technological University, M.S. Thesis: Design of an 8M MRAM, 2004;
� Raul Gali, Northwestern Polytechnic University, M.S. Thesis: Signal Process Circuit Design for a Resonant Accelerometer, 2003;
AWARDS and HONORS
� John H. Latoures Scholarship, Mechanical Engineering Department,U.C. Berkeley, 2001.
� Lankershim Awards, U.C. Berkeley, 2000
� National Science Foundation (NSF) Graduate Research Fellowship (1996-1999);
� American Associated University Woman (AAUW) Selected Professional Fellowship ,1995;
� University Fee Grant, UC Davis, 1994.
PUBLICATIONS
1. S. X. P. Su, H. S. Yang, Alice M Agogino, Resonant Accelerometer with a Two-Stage Microleverage Mechanism Fabricated by SOI-MEMS Technology, IEEE Sensors Journal, Vol.5, No.6 December 2005, p.1214-1223
2. An Sang Hou, Susan X. P. Su, Design of a Capacitive-Sensor Signal Processing System with High Accuracy and Short Conversion Time, Sensors and Actuators A: Physical, Volume 119, Issue 1, 28 March 2005, P.113-119
3. X-P S. Su, H. S. Yang, Analytical Modeling and FEM Simulation of Single-Stage Microleverage Mechanism, International Journal of Mechanical Sciences 44, 2217-2238, 2002.
4. X-P. S. Su, H. S. Yang, Two-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 22, 328-336, 2002.
5. X-P S. Su, H. S. Yang, Design of Compliant Microleverage Mechanism, Sensors and Actuators, A 87 146-156, 2001.
6. X-P S. Su, H. S. Yang, Single-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 21, 246-252, 2001
7. H. S. Yang, X-P S. Su and B. Bai, Strain Analysis in Uniaxial Tensile and Compression Testing of Anisotropic Materials, International Journal of Mechanical Sciences 42 (2000) 2395-2415.
PATENTS
1. Susan X. P. Su, �A Folded-MTJ MRAM Cell� U.S. Patent No. US60/994941, 2007
I dug up her resume...
Dr. Susan Xiao-Ping Su
President of Tri-Valley University
Tri-Valley University TVU (http://trivalleyuniversity.org)
E-mail: ssu@trivalleyuniversity.org, su123@sbcglobal.net
EDUCATION
Ph .D. Department of Mechanical Engineering, University of California at Berkeley, 2001.
Major: Design; Minor I: Microscale Heat Transfer; Minor II: Integrated Circuit Technology.
Dissertation: Compliant Microleverage Mechanism Design for MEMS Application
Dissertation Advisors: Prof. Alice M. Agogino; Prof. Tsu-Jae King, Prof. Dennise K. Lieu
M. S. Department of Mechanical and Aeronautical Engineering, University of California at Davis, 1997. Major: Design
Thesis: Computer-Aided Kinematic and Dynamic Analysis of Spatial Mechanisms
Thesis Advisors: Prof. Harry H. Cheng; Prof. Bahram Ravani; Prof. An T. Yang (Emeritus)
B. S. Department of Engineering Mechanics, Tsinghua University, China, 1991.
Major Field of Study: Fluid Mechanics
WORK EXPERIENCE
1. President and Founder, Semiconductor System Integration, Pleasanton, 2003-present
� Consultant for Phosistor Technology, Pleasanton, on Semiconductor Device Fabrication, Development of photonic component (laser and OPM) process, Oxford Plasmalab DRIE and ICP etching of SiO2 for Optical MEMS devices.
� Consultant for California Micro Device on Chip-Scale-Packaging strengthen mechanism;
� Consultant for NASA on nano chemical sensor fabrication.
� High-density Magnetic Random Access Memory Development
2. Lecturer, HerGuan University, Sunnyvale, 2007
EE537 Analog IC Design, EE515 & 516 VLSI I & II
3. Lecturer, San Jose State University, San Jose, CA, Fall 2004-2006
EE178 Digital System Design with FPGA, ME 101 Dynamic
4. Lecturer, San Francisco State University, San Francisco, CA, 2004-2005;
ENGR 890 Design of MEMS; Design of CMOS Memory Circuit
ENGR 356 Computer Architecture; ENGR378 Digital System Design with Verilog.
5. Lecturer, International Technological University, Santa Clara, CA, 2004-2007
EEN967 Analog IC Design; EE 519 CMOS Memory Circuit Design; EE 511 VlSI I, II;
EEN 923 & 910 Semiconductor Physics & Devices; EEN 918 IC Fabrication Technology.
6. Lecturer, Northwestern Polytechnic University, Fremont, CA, 9/2002 -2004
EE 507 Analog IC Design; EE 520 CMOS Memory Circuit Design;
EE 506 VLSI II; EE 624 IC Fabrication Technology; EE 581 MEMS/NEMS Design;
Developing MEMS and nanotechnology concentration area curriculum.
7. Member of Technical Staff, Project manager, PicoNetics Inc., Fremont, 9/2000-9/2002.
� 256K 100MHz (TSMC 0.25m) and 4M 200MHz SRAM design (0.13m G logic process); RLC circuit for on-chip sin wave generation, sense amplifier fro SRAM, DRAM, Bandgap reference, voltage regulator, PLL circuit design, standard cell library design.
� Supervision of two layout engineers for a 256K SRAM circuit including all technical file set-up, layout optimization for minimum coupling and RC delay, Dracula LVS and Arcadia extraction, LVS and Extraction tools evaluation and memory compliers; UMC and TSMC 0.25, 0.18, 0.15 and 0.13 m process evaluation for SRAM.
8. Graduate Researcher, Berkeley Sensor and Actuator Center (BSAC), and Berkeley Expert Technology System Lab (BEST), U. C. Berkeley, 1996-2000.
� Design, fabrication and testing of a resonant accelerometer (RXL) with on-chip amplifier and two-stage leverage mechanism by the SOI-MEMS integrated process.
� Compliant micro-leverage mechanism design and analysis, FEM analysis and simulation with ABAQUS and SUGAR; Design of the mechanism for force and displacement amplification in other MEMS devices including a micro-valve, an electrostatic actuator and the suspension of the disk drive.
9. Internship, Lawrence Berkeley National Lab, EETD, 6/1999-12/1999.
� Optics programming; SEM and TEM measurements of glass samples.
10. Graduate Researcher, Integrated Engineering and Mechatronics Lab, Dept. of Mechanical and Aeronautical Engineering, UC Davis, 1994-1996
� With Ch program, analysis of velocity and acceleration for 32 spatial mechanisms (4-bar, 5-bar, 6-bar and 7-bar); force and torque analysis of RCCC & RCRCR mechanisms;
� Designed a data acquisition system for PAS machine by communication of an AT-MIO-16F board in Labview.
GRADUATE THESIS ADVISING:
� Yaosong Tao, International Technological University, Ph.D. Thesis: RF MEMS Components for Communication Systems, 2004.
� Leo Huang, Northwestern Polytechnic University, M.S. Thesis, Contacting Printing Lithography for Polymeric Organic Light-Emitting Diode, 2005;
� Sam Shi, International Technological University, M.S. Thesis, A 8-bit Energy Recover Adder, 2005;
� Parthiv Pandya, International Technological University, M.S. Thesis: MRAM Core Cell Design and Optimization, 2004;
� Paisit Sriprataks, International Technological University, M.S. Thesis: MRAM Sensing Circuit Design, 2004;
� Balajee Premraj, International Technological University, M.S. Thesis: Design of an 8M MRAM, 2004;
� Raul Gali, Northwestern Polytechnic University, M.S. Thesis: Signal Process Circuit Design for a Resonant Accelerometer, 2003;
AWARDS and HONORS
� John H. Latoures Scholarship, Mechanical Engineering Department,U.C. Berkeley, 2001.
� Lankershim Awards, U.C. Berkeley, 2000
� National Science Foundation (NSF) Graduate Research Fellowship (1996-1999);
� American Associated University Woman (AAUW) Selected Professional Fellowship ,1995;
� University Fee Grant, UC Davis, 1994.
PUBLICATIONS
1. S. X. P. Su, H. S. Yang, Alice M Agogino, Resonant Accelerometer with a Two-Stage Microleverage Mechanism Fabricated by SOI-MEMS Technology, IEEE Sensors Journal, Vol.5, No.6 December 2005, p.1214-1223
2. An Sang Hou, Susan X. P. Su, Design of a Capacitive-Sensor Signal Processing System with High Accuracy and Short Conversion Time, Sensors and Actuators A: Physical, Volume 119, Issue 1, 28 March 2005, P.113-119
3. X-P S. Su, H. S. Yang, Analytical Modeling and FEM Simulation of Single-Stage Microleverage Mechanism, International Journal of Mechanical Sciences 44, 2217-2238, 2002.
4. X-P. S. Su, H. S. Yang, Two-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 22, 328-336, 2002.
5. X-P S. Su, H. S. Yang, Design of Compliant Microleverage Mechanism, Sensors and Actuators, A 87 146-156, 2001.
6. X-P S. Su, H. S. Yang, Single-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 21, 246-252, 2001
7. H. S. Yang, X-P S. Su and B. Bai, Strain Analysis in Uniaxial Tensile and Compression Testing of Anisotropic Materials, International Journal of Mechanical Sciences 42 (2000) 2395-2415.
PATENTS
1. Susan X. P. Su, �A Folded-MTJ MRAM Cell� U.S. Patent No. US60/994941, 2007
Ram_C
11-09 02:12 PM
Maybe USCIS thinks that our cases mayn't become approvable within the next 15 months. This is just my theory, because I see lot of people have got FP but with early PD's
this might not be true, because I personally know about 7/8 applicants with PD of 2007 (I-140 pending) and received thier FP notices.
this might not be true, because I personally know about 7/8 applicants with PD of 2007 (I-140 pending) and received thier FP notices.
2011 2010 real madrid wallpapers
diptam
08-01 10:34 AM
I know we are just narrowly thinking about 485 for the retrogressed battered world but they are taking big picture :)
whatever it is - we have to wait with patience for atleast another month
The comment about the "Fee Increase" might be partially true. There is surely a surge in number of application for Naturalization, to avoid the few increase... Atleast I know a couple of friends who applied for citizenship....
whatever it is - we have to wait with patience for atleast another month
The comment about the "Fee Increase" might be partially true. There is surely a surge in number of application for Naturalization, to avoid the few increase... Atleast I know a couple of friends who applied for citizenship....
more...
VMH_GC
07-10 08:16 PM
I think we should brought up this to indian government and use government powers to pressure CNN in india to take up this matter with Mr. Turner.
n_2006
05-22 03:53 PM
Its funny that we tried so hard to stay legal. Now we trying very hard to find out ways to become illegal.
more...
makemygc
08-21 10:18 AM
Office of Inspector General, they investigate all Labor Frauds
Can you reveal the name of this employer?
Can you reveal the name of this employer?
2010 real madrid vs barcelona
eb3retro
10-29 09:41 PM
Hi eb3retro,
I see that your PD is Jan 2003. Mine is Mar 03. I thought I would ask you about your opininons.
So, do you think we will get our GC in 2009?
Do you think it would be better to move to EB2?
Thanks for your inputs.
hi, personally i am looking for a chance to move to eb2. Being in eb3-I is as good as u will never get ur GC,or by the time you get ur GC, u would have lost your time and patience to live in this country anymore. follow your instincts..
I see that your PD is Jan 2003. Mine is Mar 03. I thought I would ask you about your opininons.
So, do you think we will get our GC in 2009?
Do you think it would be better to move to EB2?
Thanks for your inputs.
hi, personally i am looking for a chance to move to eb2. Being in eb3-I is as good as u will never get ur GC,or by the time you get ur GC, u would have lost your time and patience to live in this country anymore. follow your instincts..
more...
diptam
07-02 04:02 PM
Medical - $350
0.5 day off for Medical + 0.5 Follow up Medical - $400
Photo - $10
USPS Express Mailing - $20
Birth Cert from NY Consulate - $20
Visit to NY Consulate from Boston - $110
1 day off for Birth Certificate - $400
Origina Birth Cert Affidavit (From India) - $10
Misc - $80
------------
$1400
Plus the emotional distress and Pain i'm bearing continuously....
0.5 day off for Medical + 0.5 Follow up Medical - $400
Photo - $10
USPS Express Mailing - $20
Birth Cert from NY Consulate - $20
Visit to NY Consulate from Boston - $110
1 day off for Birth Certificate - $400
Origina Birth Cert Affidavit (From India) - $10
Misc - $80
------------
$1400
Plus the emotional distress and Pain i'm bearing continuously....
hair real madrid vs barcelona copa
aachoo
02-14 01:18 AM
got LUD on 1/29, 1/30 RFE send, 2/10 RFE evidence received, 2/11
I am also an NCS-CSC-NSC transfer. Got LUDs on 2/10 on my/my wife's application. I just got an email saying an RFE was sent just for my application.
Anyone else that got RFEs after getting LUDs at the beginning of Feb? What were the RFEs for?
-a
I am also an NCS-CSC-NSC transfer. Got LUDs on 2/10 on my/my wife's application. I just got an email saying an RFE was sent just for my application.
Anyone else that got RFEs after getting LUDs at the beginning of Feb? What were the RFEs for?
-a
more...
ramaonline
05-11 04:23 PM
Great idea... The only problem is that even the small group won't show up.
I volunteer to get whipped - Who will be Uncle Sam?
Another idea.. (this will require a small bunch of people only)
Let a group of 10-25 people tie themselves on chainballs and handcuffs (or fetters) and march 1 mile to the USCIS office. Get this event covered by media..
Hold banners like "Free us", "We want EAD", "i485 NOW" and raise a few slogans
In addition someone can dress as Uncle Sam and pretend to whip the prisoners....
I volunteer to get whipped - Who will be Uncle Sam?
Another idea.. (this will require a small bunch of people only)
Let a group of 10-25 people tie themselves on chainballs and handcuffs (or fetters) and march 1 mile to the USCIS office. Get this event covered by media..
Hold banners like "Free us", "We want EAD", "i485 NOW" and raise a few slogans
In addition someone can dress as Uncle Sam and pretend to whip the prisoners....
hot pictures real madrid vs barcelona real madrid vs barcelona 2011 wallpaper.
laborday
07-17 10:35 AM
The processing time is still as of June 18th... There is no july yet
Close all of your browser and start a new one. This may work.
Close all of your browser and start a new one. This may work.
more...
house real madrid vs barcelona
DSLStart
04-29 01:42 PM
Pakistan had the F series jet fighters since the last many decades. The Americans were offering the advanced version to India and Pakistan. Pakistan is much ahead of India in maintaining log sheets of it with rich experience of 30-plus years. The type of relationship that exists between the US and Pakistan Air Force what is the guarantee that our system won't be leaked to Pakistan's system? If that happens, India's advantage would vanish.
Quick Chain of events .
India rejected both Boeing and Lockheed Martin's proposal of fighters . I am not debating the reasons or the merits of this decision if this was right or wrong . I am just discussing the potential repercussions this has had so far and might have .
'Exclusion of US firms from IAF jet deal a setback for ties' (http://www.indianexpress.com/news/exclusion-of-us-firms-from-iaf-jet-deal-a-setback.../783401/)
1) The issue is so serious that Tim Roemer , US Ambassador to India submitted his resignation immediately since he was on the hook for making this deal work .This shows the measure of disappointment they had.
2) India was seeking US assurances in security a Permanent Security council seat , which looks far fetched now .
4) Pentagon , Whitehouse and the DoD very upset that deal fell through . This sentiment will certainly percolate to the USCIS and the State department and might embolden Anti Immigration senators whose measures will get more support in the house and senate.
5) Prosecution of companies entangled in cases like Infosys might find more support and favor with the Govt.
Question is how/if there will be a backlash against India / Indian's get back at us at least in the short term .Increased scrutiny and visa denials , PoE Harassment , GC audits etc.
Will the US take a Tit-for-Tat reaction on this issue is what remains to be seen.
Quick Chain of events .
India rejected both Boeing and Lockheed Martin's proposal of fighters . I am not debating the reasons or the merits of this decision if this was right or wrong . I am just discussing the potential repercussions this has had so far and might have .
'Exclusion of US firms from IAF jet deal a setback for ties' (http://www.indianexpress.com/news/exclusion-of-us-firms-from-iaf-jet-deal-a-setback.../783401/)
1) The issue is so serious that Tim Roemer , US Ambassador to India submitted his resignation immediately since he was on the hook for making this deal work .This shows the measure of disappointment they had.
2) India was seeking US assurances in security a Permanent Security council seat , which looks far fetched now .
4) Pentagon , Whitehouse and the DoD very upset that deal fell through . This sentiment will certainly percolate to the USCIS and the State department and might embolden Anti Immigration senators whose measures will get more support in the house and senate.
5) Prosecution of companies entangled in cases like Infosys might find more support and favor with the Govt.
Question is how/if there will be a backlash against India / Indian's get back at us at least in the short term .Increased scrutiny and visa denials , PoE Harassment , GC audits etc.
Will the US take a Tit-for-Tat reaction on this issue is what remains to be seen.
tattoo real madrid vs barcelona april
needhelp!
01-11 12:38 PM
Voting multiple times is not allowed, so this is going to be hard to track.
eg. If I vote right now that i have contacted congressman, I won't be able to come back and change my vote when the congressman sends the letter out.
eg. If I vote right now that i have contacted congressman, I won't be able to come back and change my vote when the congressman sends the letter out.
more...
pictures real madrid vs barcelona
lacrossegc
04-13 08:29 PM
Good Idea ... May be we can build on this ... making monetary contrributions will risk the appearance of "buying a green card".
How about this:
Most of us claim to be highly experienced, highly educated, in diverse fields. A while back there was an announcement about serving for the military and in exchange for the service, you get a green card/ fast track to citizenship. In a similar vein, if there is a progam in place where we commit to educate students in colleges, high schools and other accredited institutions for a certain fixed period (say 1-2 yrs), we earn the green card sooner. This would be more platable. We utilize our skills, teach students, serve the community and shows our commitment to our prospective adopted country. It fits in like a glove with what President Obama is calling on citizens to do, his "army of teachers" ready made
This way we will be able to channelize positive support and there will be nothing that antis could argue against.
I love to teach, I have taught before while completing my Masters.
How about this:
Most of us claim to be highly experienced, highly educated, in diverse fields. A while back there was an announcement about serving for the military and in exchange for the service, you get a green card/ fast track to citizenship. In a similar vein, if there is a progam in place where we commit to educate students in colleges, high schools and other accredited institutions for a certain fixed period (say 1-2 yrs), we earn the green card sooner. This would be more platable. We utilize our skills, teach students, serve the community and shows our commitment to our prospective adopted country. It fits in like a glove with what President Obama is calling on citizens to do, his "army of teachers" ready made
This way we will be able to channelize positive support and there will be nothing that antis could argue against.
I love to teach, I have taught before while completing my Masters.
dresses real madrid vs barcelona
rajuseattle
08-05 04:07 PM
chakdepatte,
Is your e-file or Paper filed? Since you have posted your details in the NSC EAD e-file tracker I assume yours is E-file. What was the FP date for you?
Can you please share this information with other IVans?
Is your e-file or Paper filed? Since you have posted your details in the NSC EAD e-file tracker I assume yours is E-file. What was the FP date for you?
Can you please share this information with other IVans?
more...
makeup Cristiano Ronaldo Real Madrid
ryan
07-13 02:07 PM
[QUOTE=dineshksharma;487749]"Long Journey. Finally GC
by J2GC
Hi Guys,
After a long journey of more than Sixteen years in this country, I finally received my GC.
In short, I came in 1993 on J-1 for my training which took six years, followed by one year on O-1 visa and then J-1 waiver for three and half years in underserved area.....QUOTE]
Inspirational stuff, indeed. Congratulations.
by J2GC
Hi Guys,
After a long journey of more than Sixteen years in this country, I finally received my GC.
In short, I came in 1993 on J-1 for my training which took six years, followed by one year on O-1 visa and then J-1 waiver for three and half years in underserved area.....QUOTE]
Inspirational stuff, indeed. Congratulations.
girlfriend real madrid vs barcelona 2011
masterji
08-09 09:17 PM
It seems people who revoked AC21 during pre-GC stage, can continue to change employers in the post-GC phase. The confusion is for the people who stayed with their employers throughout the GC process. Please correct me if I am wrong.
hairstyles wallpaper watch real madrid vs
AgentM
07-12 11:43 AM
Increase the Visa numbers, that's what we should be aiming for.
A one time news event is not going to solve the problem.
The July fiasco, should be used to start an all out campaign with Congress to increase the Visa numbers.
Let this opportunity not go to waste.
Please keep fighting.
Send flowers on 12th of every month to USCIS or DOS.
Do not let this opportunity go waste.
A one time news event is not going to solve the problem.
The July fiasco, should be used to start an all out campaign with Congress to increase the Visa numbers.
Let this opportunity not go to waste.
Please keep fighting.
Send flowers on 12th of every month to USCIS or DOS.
Do not let this opportunity go waste.
gc_on_demand
11-19 04:05 PM
We have a good article on WSJ. Anti doesn't want our people to go there and post comment on it so they are creating this kind of thread here so people spend their time here fighting and they continue posting -ve comments there.
anilsal
08-13 10:51 PM
"How many of us are going to attend the Sept. 18th DC rally?"
No comments:
Post a Comment