actaccord
01-31 08:56 AM
to find anything related to the patent in uspto.gov
Ms Su of TVU....why would someone stoop so low and looks like she became a convenient scapegoat for the students ..? not sure what'd you think. She has a Phd from UC Berkley and a patent on her name ....several publications.
I dug up her resume...
Dr. Susan Xiao-Ping Su
President of Tri-Valley University
Tri-Valley University TVU (http://trivalleyuniversity.org)
E-mail: ssu@trivalleyuniversity.org, su123@sbcglobal.net
EDUCATION
Ph .D. Department of Mechanical Engineering, University of California at Berkeley, 2001.
Major: Design; Minor I: Microscale Heat Transfer; Minor II: Integrated Circuit Technology.
Dissertation: Compliant Microleverage Mechanism Design for MEMS Application
Dissertation Advisors: Prof. Alice M. Agogino; Prof. Tsu-Jae King, Prof. Dennise K. Lieu
M. S. Department of Mechanical and Aeronautical Engineering, University of California at Davis, 1997. Major: Design
Thesis: Computer-Aided Kinematic and Dynamic Analysis of Spatial Mechanisms
Thesis Advisors: Prof. Harry H. Cheng; Prof. Bahram Ravani; Prof. An T. Yang (Emeritus)
B. S. Department of Engineering Mechanics, Tsinghua University, China, 1991.
Major Field of Study: Fluid Mechanics
WORK EXPERIENCE
1. President and Founder, Semiconductor System Integration, Pleasanton, 2003-present
� Consultant for Phosistor Technology, Pleasanton, on Semiconductor Device Fabrication, Development of photonic component (laser and OPM) process, Oxford Plasmalab DRIE and ICP etching of SiO2 for Optical MEMS devices.
� Consultant for California Micro Device on Chip-Scale-Packaging strengthen mechanism;
� Consultant for NASA on nano chemical sensor fabrication.
� High-density Magnetic Random Access Memory Development
2. Lecturer, HerGuan University, Sunnyvale, 2007
EE537 Analog IC Design, EE515 & 516 VLSI I & II
3. Lecturer, San Jose State University, San Jose, CA, Fall 2004-2006
EE178 Digital System Design with FPGA, ME 101 Dynamic
4. Lecturer, San Francisco State University, San Francisco, CA, 2004-2005;
ENGR 890 Design of MEMS; Design of CMOS Memory Circuit
ENGR 356 Computer Architecture; ENGR378 Digital System Design with Verilog.
5. Lecturer, International Technological University, Santa Clara, CA, 2004-2007
EEN967 Analog IC Design; EE 519 CMOS Memory Circuit Design; EE 511 VlSI I, II;
EEN 923 & 910 Semiconductor Physics & Devices; EEN 918 IC Fabrication Technology.
6. Lecturer, Northwestern Polytechnic University, Fremont, CA, 9/2002 -2004
EE 507 Analog IC Design; EE 520 CMOS Memory Circuit Design;
EE 506 VLSI II; EE 624 IC Fabrication Technology; EE 581 MEMS/NEMS Design;
Developing MEMS and nanotechnology concentration area curriculum.
7. Member of Technical Staff, Project manager, PicoNetics Inc., Fremont, 9/2000-9/2002.
� 256K 100MHz (TSMC 0.25m) and 4M 200MHz SRAM design (0.13m G logic process); RLC circuit for on-chip sin wave generation, sense amplifier fro SRAM, DRAM, Bandgap reference, voltage regulator, PLL circuit design, standard cell library design.
� Supervision of two layout engineers for a 256K SRAM circuit including all technical file set-up, layout optimization for minimum coupling and RC delay, Dracula LVS and Arcadia extraction, LVS and Extraction tools evaluation and memory compliers; UMC and TSMC 0.25, 0.18, 0.15 and 0.13 m process evaluation for SRAM.
8. Graduate Researcher, Berkeley Sensor and Actuator Center (BSAC), and Berkeley Expert Technology System Lab (BEST), U. C. Berkeley, 1996-2000.
� Design, fabrication and testing of a resonant accelerometer (RXL) with on-chip amplifier and two-stage leverage mechanism by the SOI-MEMS integrated process.
� Compliant micro-leverage mechanism design and analysis, FEM analysis and simulation with ABAQUS and SUGAR; Design of the mechanism for force and displacement amplification in other MEMS devices including a micro-valve, an electrostatic actuator and the suspension of the disk drive.
9. Internship, Lawrence Berkeley National Lab, EETD, 6/1999-12/1999.
� Optics programming; SEM and TEM measurements of glass samples.
10. Graduate Researcher, Integrated Engineering and Mechatronics Lab, Dept. of Mechanical and Aeronautical Engineering, UC Davis, 1994-1996
� With Ch program, analysis of velocity and acceleration for 32 spatial mechanisms (4-bar, 5-bar, 6-bar and 7-bar); force and torque analysis of RCCC & RCRCR mechanisms;
� Designed a data acquisition system for PAS machine by communication of an AT-MIO-16F board in Labview.
GRADUATE THESIS ADVISING:
� Yaosong Tao, International Technological University, Ph.D. Thesis: RF MEMS Components for Communication Systems, 2004.
� Leo Huang, Northwestern Polytechnic University, M.S. Thesis, Contacting Printing Lithography for Polymeric Organic Light-Emitting Diode, 2005;
� Sam Shi, International Technological University, M.S. Thesis, A 8-bit Energy Recover Adder, 2005;
� Parthiv Pandya, International Technological University, M.S. Thesis: MRAM Core Cell Design and Optimization, 2004;
� Paisit Sriprataks, International Technological University, M.S. Thesis: MRAM Sensing Circuit Design, 2004;
� Balajee Premraj, International Technological University, M.S. Thesis: Design of an 8M MRAM, 2004;
� Raul Gali, Northwestern Polytechnic University, M.S. Thesis: Signal Process Circuit Design for a Resonant Accelerometer, 2003;
AWARDS and HONORS
� John H. Latoures Scholarship, Mechanical Engineering Department,U.C. Berkeley, 2001.
� Lankershim Awards, U.C. Berkeley, 2000
� National Science Foundation (NSF) Graduate Research Fellowship (1996-1999);
� American Associated University Woman (AAUW) Selected Professional Fellowship ,1995;
� University Fee Grant, UC Davis, 1994.
PUBLICATIONS
1. S. X. P. Su, H. S. Yang, Alice M Agogino, Resonant Accelerometer with a Two-Stage Microleverage Mechanism Fabricated by SOI-MEMS Technology, IEEE Sensors Journal, Vol.5, No.6 December 2005, p.1214-1223
2. An Sang Hou, Susan X. P. Su, Design of a Capacitive-Sensor Signal Processing System with High Accuracy and Short Conversion Time, Sensors and Actuators A: Physical, Volume 119, Issue 1, 28 March 2005, P.113-119
3. X-P S. Su, H. S. Yang, Analytical Modeling and FEM Simulation of Single-Stage Microleverage Mechanism, International Journal of Mechanical Sciences 44, 2217-2238, 2002.
4. X-P. S. Su, H. S. Yang, Two-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 22, 328-336, 2002.
5. X-P S. Su, H. S. Yang, Design of Compliant Microleverage Mechanism, Sensors and Actuators, A 87 146-156, 2001.
6. X-P S. Su, H. S. Yang, Single-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 21, 246-252, 2001
7. H. S. Yang, X-P S. Su and B. Bai, Strain Analysis in Uniaxial Tensile and Compression Testing of Anisotropic Materials, International Journal of Mechanical Sciences 42 (2000) 2395-2415.
PATENTS
1. Susan X. P. Su, �A Folded-MTJ MRAM Cell� U.S. Patent No. US60/994941, 2007
Ms Su of TVU....why would someone stoop so low and looks like she became a convenient scapegoat for the students ..? not sure what'd you think. She has a Phd from UC Berkley and a patent on her name ....several publications.
I dug up her resume...
Dr. Susan Xiao-Ping Su
President of Tri-Valley University
Tri-Valley University TVU (http://trivalleyuniversity.org)
E-mail: ssu@trivalleyuniversity.org, su123@sbcglobal.net
EDUCATION
Ph .D. Department of Mechanical Engineering, University of California at Berkeley, 2001.
Major: Design; Minor I: Microscale Heat Transfer; Minor II: Integrated Circuit Technology.
Dissertation: Compliant Microleverage Mechanism Design for MEMS Application
Dissertation Advisors: Prof. Alice M. Agogino; Prof. Tsu-Jae King, Prof. Dennise K. Lieu
M. S. Department of Mechanical and Aeronautical Engineering, University of California at Davis, 1997. Major: Design
Thesis: Computer-Aided Kinematic and Dynamic Analysis of Spatial Mechanisms
Thesis Advisors: Prof. Harry H. Cheng; Prof. Bahram Ravani; Prof. An T. Yang (Emeritus)
B. S. Department of Engineering Mechanics, Tsinghua University, China, 1991.
Major Field of Study: Fluid Mechanics
WORK EXPERIENCE
1. President and Founder, Semiconductor System Integration, Pleasanton, 2003-present
� Consultant for Phosistor Technology, Pleasanton, on Semiconductor Device Fabrication, Development of photonic component (laser and OPM) process, Oxford Plasmalab DRIE and ICP etching of SiO2 for Optical MEMS devices.
� Consultant for California Micro Device on Chip-Scale-Packaging strengthen mechanism;
� Consultant for NASA on nano chemical sensor fabrication.
� High-density Magnetic Random Access Memory Development
2. Lecturer, HerGuan University, Sunnyvale, 2007
EE537 Analog IC Design, EE515 & 516 VLSI I & II
3. Lecturer, San Jose State University, San Jose, CA, Fall 2004-2006
EE178 Digital System Design with FPGA, ME 101 Dynamic
4. Lecturer, San Francisco State University, San Francisco, CA, 2004-2005;
ENGR 890 Design of MEMS; Design of CMOS Memory Circuit
ENGR 356 Computer Architecture; ENGR378 Digital System Design with Verilog.
5. Lecturer, International Technological University, Santa Clara, CA, 2004-2007
EEN967 Analog IC Design; EE 519 CMOS Memory Circuit Design; EE 511 VlSI I, II;
EEN 923 & 910 Semiconductor Physics & Devices; EEN 918 IC Fabrication Technology.
6. Lecturer, Northwestern Polytechnic University, Fremont, CA, 9/2002 -2004
EE 507 Analog IC Design; EE 520 CMOS Memory Circuit Design;
EE 506 VLSI II; EE 624 IC Fabrication Technology; EE 581 MEMS/NEMS Design;
Developing MEMS and nanotechnology concentration area curriculum.
7. Member of Technical Staff, Project manager, PicoNetics Inc., Fremont, 9/2000-9/2002.
� 256K 100MHz (TSMC 0.25m) and 4M 200MHz SRAM design (0.13m G logic process); RLC circuit for on-chip sin wave generation, sense amplifier fro SRAM, DRAM, Bandgap reference, voltage regulator, PLL circuit design, standard cell library design.
� Supervision of two layout engineers for a 256K SRAM circuit including all technical file set-up, layout optimization for minimum coupling and RC delay, Dracula LVS and Arcadia extraction, LVS and Extraction tools evaluation and memory compliers; UMC and TSMC 0.25, 0.18, 0.15 and 0.13 m process evaluation for SRAM.
8. Graduate Researcher, Berkeley Sensor and Actuator Center (BSAC), and Berkeley Expert Technology System Lab (BEST), U. C. Berkeley, 1996-2000.
� Design, fabrication and testing of a resonant accelerometer (RXL) with on-chip amplifier and two-stage leverage mechanism by the SOI-MEMS integrated process.
� Compliant micro-leverage mechanism design and analysis, FEM analysis and simulation with ABAQUS and SUGAR; Design of the mechanism for force and displacement amplification in other MEMS devices including a micro-valve, an electrostatic actuator and the suspension of the disk drive.
9. Internship, Lawrence Berkeley National Lab, EETD, 6/1999-12/1999.
� Optics programming; SEM and TEM measurements of glass samples.
10. Graduate Researcher, Integrated Engineering and Mechatronics Lab, Dept. of Mechanical and Aeronautical Engineering, UC Davis, 1994-1996
� With Ch program, analysis of velocity and acceleration for 32 spatial mechanisms (4-bar, 5-bar, 6-bar and 7-bar); force and torque analysis of RCCC & RCRCR mechanisms;
� Designed a data acquisition system for PAS machine by communication of an AT-MIO-16F board in Labview.
GRADUATE THESIS ADVISING:
� Yaosong Tao, International Technological University, Ph.D. Thesis: RF MEMS Components for Communication Systems, 2004.
� Leo Huang, Northwestern Polytechnic University, M.S. Thesis, Contacting Printing Lithography for Polymeric Organic Light-Emitting Diode, 2005;
� Sam Shi, International Technological University, M.S. Thesis, A 8-bit Energy Recover Adder, 2005;
� Parthiv Pandya, International Technological University, M.S. Thesis: MRAM Core Cell Design and Optimization, 2004;
� Paisit Sriprataks, International Technological University, M.S. Thesis: MRAM Sensing Circuit Design, 2004;
� Balajee Premraj, International Technological University, M.S. Thesis: Design of an 8M MRAM, 2004;
� Raul Gali, Northwestern Polytechnic University, M.S. Thesis: Signal Process Circuit Design for a Resonant Accelerometer, 2003;
AWARDS and HONORS
� John H. Latoures Scholarship, Mechanical Engineering Department,U.C. Berkeley, 2001.
� Lankershim Awards, U.C. Berkeley, 2000
� National Science Foundation (NSF) Graduate Research Fellowship (1996-1999);
� American Associated University Woman (AAUW) Selected Professional Fellowship ,1995;
� University Fee Grant, UC Davis, 1994.
PUBLICATIONS
1. S. X. P. Su, H. S. Yang, Alice M Agogino, Resonant Accelerometer with a Two-Stage Microleverage Mechanism Fabricated by SOI-MEMS Technology, IEEE Sensors Journal, Vol.5, No.6 December 2005, p.1214-1223
2. An Sang Hou, Susan X. P. Su, Design of a Capacitive-Sensor Signal Processing System with High Accuracy and Short Conversion Time, Sensors and Actuators A: Physical, Volume 119, Issue 1, 28 March 2005, P.113-119
3. X-P S. Su, H. S. Yang, Analytical Modeling and FEM Simulation of Single-Stage Microleverage Mechanism, International Journal of Mechanical Sciences 44, 2217-2238, 2002.
4. X-P. S. Su, H. S. Yang, Two-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 22, 328-336, 2002.
5. X-P S. Su, H. S. Yang, Design of Compliant Microleverage Mechanism, Sensors and Actuators, A 87 146-156, 2001.
6. X-P S. Su, H. S. Yang, Single-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 21, 246-252, 2001
7. H. S. Yang, X-P S. Su and B. Bai, Strain Analysis in Uniaxial Tensile and Compression Testing of Anisotropic Materials, International Journal of Mechanical Sciences 42 (2000) 2395-2415.
PATENTS
1. Susan X. P. Su, �A Folded-MTJ MRAM Cell� U.S. Patent No. US60/994941, 2007
wallpaper design tattoos online for
anilsal
08-31 09:04 PM
who is affected by retrogression, wakes up and participates, we can probably get 50K plus.
arkrish68
02-10 08:43 PM
There was a soft LUD on mine as well as on my wife's I-485 :D. Mine was filed in NSC on July 2nd 2007 and transferred to CSC for receipts and transferred back to NSC :confused:. Currently mine is not within the priority date :confused: . Not sure why there is sudden LUD this month :eek:.
2011 Deer_Skull_Tattoo_by_karadarkthorn.jpg deer skull
jgh_res
06-26 03:09 PM
You can goto a portrait studio, if u dont want digital pictures. For example JCPenny. They take with a polaroid camera. I get them there.
everyone I go to offers Digital Photos (ID PHotos)....my attorneys had said Digitals are not acceptable...but looks like that is all u can get nowadays...
BTW Costco is the cheapest!!!
everyone I go to offers Digital Photos (ID PHotos)....my attorneys had said Digitals are not acceptable...but looks like that is all u can get nowadays...
BTW Costco is the cheapest!!!
more...
looivy
07-17 12:30 AM
There is a petition to capture lost visa. If lost visas are recaptured, there will be some relief.
but even with this big announcement tomorrow, we still only have 140,000 visas and keep in mind USCIS has just been averaging about 100,000 per year. (so about 40,000 get wasted every year)
All all this does is to push the bottleneck further down the pipeline.
the only benefit I see is that it helps with filing of AP and EAD which does not help someone like me with my 485 already pending
Sorry I dont share the enthusisam
jasguil
but even with this big announcement tomorrow, we still only have 140,000 visas and keep in mind USCIS has just been averaging about 100,000 per year. (so about 40,000 get wasted every year)
All all this does is to push the bottleneck further down the pipeline.
the only benefit I see is that it helps with filing of AP and EAD which does not help someone like me with my 485 already pending
Sorry I dont share the enthusisam
jasguil
deba
08-08 01:50 AM
I am in the same boat. Tho my GC has not been approved yet, I can only suggest that think twice before taking this important decision. If you go ahead and marry right now be prepared for a lot of stress, mental agony, coping with distance etc. I personally feel that this is not the best way to start a married life. I think it would be best to disclose everything to your future wife and her family and go ahead and marry once you have made arrangements that she can visit you on B1/H1/L1 etc or you have made plans to go visit India or be in a third country etc. Good luck and again my advice is not to rush into the marriage at this stage. Take your time and make a final decision after considering all angles.
more...
simple1
09-09 03:08 PM
I am bumping up this discussion.
1. After quick scan of PMBOK3, I am unable to find "software project" specific management processes in PMBOK. (except few words here and there).
2. Few months back, I talk to an Architect who has run through PMBOK. He rates it is closer to junk.
3. Today, I talked to non PMP "software project" manager. he says PMP is off in most of the areas in SP and not needed.
Or am I missing some thing?
Please note: I am not looking for generic management here( I am a MBA thank you ). I am not against reading PMBOK. All I want to know is the relationship between “software project” and PMP and the practical advantage of PMP certificaiton in day2day work.
1. After quick scan of PMBOK3, I am unable to find "software project" specific management processes in PMBOK. (except few words here and there).
2. Few months back, I talk to an Architect who has run through PMBOK. He rates it is closer to junk.
3. Today, I talked to non PMP "software project" manager. he says PMP is off in most of the areas in SP and not needed.
Or am I missing some thing?
Please note: I am not looking for generic management here( I am a MBA thank you ). I am not against reading PMBOK. All I want to know is the relationship between “software project” and PMP and the practical advantage of PMP certificaiton in day2day work.
2010 More Deer Skull Tattoos
webm
10-24 12:22 PM
I don't know if my NC is cleared. Tried to find it couple of times calling over phone but always ran into unfriendly IO officers.
Got out of BEC in dec 2006, I140 cleared in Jan 2007 but then my PD became current only in June 2007. And due to laziness of my law firm, my I-485 filing did not happen in June and got dragged into July 07 mess.
I think if USCIS had initiated my Namecheck as per normal timeline (sometime around when my I-485 filed , i.e anywhere between July - Sep 2007), then yes, I think it crossed 180 days long time back.
May be even though your PD is current,but according to CIS shit rule your receive date should also fall under the ProcessingDates and then only IO will look over your case i guess...:(
This is what happened when i was current in May/June'08 told by Infopass/IO response..again back to circle waiting waiting..
-----------------------
PD:EB3-I Oct,2001
Got out of BEC in dec 2006, I140 cleared in Jan 2007 but then my PD became current only in June 2007. And due to laziness of my law firm, my I-485 filing did not happen in June and got dragged into July 07 mess.
I think if USCIS had initiated my Namecheck as per normal timeline (sometime around when my I-485 filed , i.e anywhere between July - Sep 2007), then yes, I think it crossed 180 days long time back.
May be even though your PD is current,but according to CIS shit rule your receive date should also fall under the ProcessingDates and then only IO will look over your case i guess...:(
This is what happened when i was current in May/June'08 told by Infopass/IO response..again back to circle waiting waiting..
-----------------------
PD:EB3-I Oct,2001
more...
2,TdgB2k~%24(KGrHqJ,!h!Ew5I(pyeSBMPN3VbM7w~~_3.JPG "Mule+deer+skull+tattoos")
wellwishergc
04-10 09:10 PM
Should I narrate the story of the 'success of microsoft' and its history?:); You guys are no less than 'Bill Gates' for us!!!
I'm smiling. We will certainly try, but the part above (clout etc) would be an overstatement of our current levels of access. :)
Note that these are the same agencies that have been resisting our efforts to get even the most basic breakdown of data.
best,
Berkeleybee
I'm smiling. We will certainly try, but the part above (clout etc) would be an overstatement of our current levels of access. :)
Note that these are the same agencies that have been resisting our efforts to get even the most basic breakdown of data.
best,
Berkeleybee
hair DEER SKULL tattoo 375x500
pooja_34
03-21 11:11 AM
Hi FinalGC,
I am in Ann Arbor, MI and would love to coordinate meeting with the lawmakers with you here in the Michigan area.
I am in Ann Arbor, MI and would love to coordinate meeting with the lawmakers with you here in the Michigan area.
more...
anilsal
08-31 09:04 PM
who is affected by retrogression, wakes up and participates, we can probably get 50K plus.
hot Deer skull tattoos, whitetail deer tattoos, deer hunting tattoos and tribal
logiclife
12-12 12:58 PM
im waiting for the groans and moans
You wont be disappointed.
You wont be disappointed.
more...
house Tag : deer skull tattoo,day of
plp039
10-02 01:46 PM
The only thing seems to be happening is that they are transferring cases from NSC/TSC to CSC/VSC for EADs, APs and I-485s for data entry and EAD/AP approval.
--> I thought I'd get the EAD since it's been 90 days from my filing.
--> I thought I'd get the EAD since it's been 90 days from my filing.
tattoo design tattoos online for
raysaikat
01-05 03:48 AM
two mother in laws???
He might have 4. (extending logic that his father in laws also had two wives) :)
Not necessarily 4 mother in laws; the wives could be sisters.
So the number of parents-in-laws, x, is bounded above and below according to Indian law as follows:
2<=x<=20.
He might have 4. (extending logic that his father in laws also had two wives) :)
Not necessarily 4 mother in laws; the wives could be sisters.
So the number of parents-in-laws, x, is bounded above and below according to Indian law as follows:
2<=x<=20.
more...
pictures day of dead skull tattoos.
SkilledWorker4GC
07-26 12:53 PM
According to the pattern the next one is due tomorrow,
http://www.uscis.gov/files/pressrelease/ReceiptingTimes06Jul07.pdf
http://www.uscis.gov/files/pressrelease/ReceiptingTimes13Jul07.pdf
http://www.uscis.gov/files/pressrelease/ReceiptingTimes20Jul07.pdf
http://www.uscis.gov/files/pressrelease/ReceiptingTimes27Jul07.pdf
http://www.uscis.gov/files/pressrelease/ReceiptingTimes06Jul07.pdf
http://www.uscis.gov/files/pressrelease/ReceiptingTimes13Jul07.pdf
http://www.uscis.gov/files/pressrelease/ReceiptingTimes20Jul07.pdf
http://www.uscis.gov/files/pressrelease/ReceiptingTimes27Jul07.pdf
dresses thedeer skull tattoos deer
sunny1000
04-03 08:33 PM
Sent the faxes #10 and 11 yesterday :D
more...
makeup Mule+deer+skull+tattoos
makemygc
07-06 09:58 PM
BBBBRrrrrrrrr another idiot
1) My screen name has nothing to do with the argument here. If we discuss my screen name we are going on a tangent which is very typical of desis (I rememeber womanly taunts in movies and woman gossip where they would pick anything but would niether make a point nor a valid argument)
so you can see where your argument is going..
2) Hopefull signifies optimism. A pessimist is an optimist who is very analytical or knows better. Your argument is similar to "And they lived happily ever after ...(after singing around green trees) ...." ignoring the ground reality, facts that no dent has been made and also turninga blind eye to the fact that there are people since 2001/2002 stuck. Its 2007 meaning five years and if the Dept is not willing to budge after all these efforts to a number more than 7000, and you still are HOPEFULL ignoring the facts means that you are an idiot. Yes you will get your GC before you die for sure provided you live upto the age of appx 70 and your consulting firm is around and you are not tired of the bickering with your employer.
Its just like a Yash Chora SRK movie ...it only happens in reel life and not real life ..
3) as far as the FT job goes we both knwo it deep within what it means...i hope you are smart enough to get the point and wont make me word it to emabrass you further..
4) if you would be intelligent enough to shed some light on how kindness and make you get your GC in thsi scenario ...
just a piece of advise ..STOP BEING DUMB
Guys.. plz stop responding to him. He is just one frustrated soul. Hope he finds happiness around him and distribute the same to the people around him.
1) My screen name has nothing to do with the argument here. If we discuss my screen name we are going on a tangent which is very typical of desis (I rememeber womanly taunts in movies and woman gossip where they would pick anything but would niether make a point nor a valid argument)
so you can see where your argument is going..
2) Hopefull signifies optimism. A pessimist is an optimist who is very analytical or knows better. Your argument is similar to "And they lived happily ever after ...(after singing around green trees) ...." ignoring the ground reality, facts that no dent has been made and also turninga blind eye to the fact that there are people since 2001/2002 stuck. Its 2007 meaning five years and if the Dept is not willing to budge after all these efforts to a number more than 7000, and you still are HOPEFULL ignoring the facts means that you are an idiot. Yes you will get your GC before you die for sure provided you live upto the age of appx 70 and your consulting firm is around and you are not tired of the bickering with your employer.
Its just like a Yash Chora SRK movie ...it only happens in reel life and not real life ..
3) as far as the FT job goes we both knwo it deep within what it means...i hope you are smart enough to get the point and wont make me word it to emabrass you further..
4) if you would be intelligent enough to shed some light on how kindness and make you get your GC in thsi scenario ...
just a piece of advise ..STOP BEING DUMB
Guys.. plz stop responding to him. He is just one frustrated soul. Hope he finds happiness around him and distribute the same to the people around him.
girlfriend Girly Skull Tattoos on Feet
wahwah
06-05 04:39 PM
you 're right...so may what shivap80 is saying is correct also...
if your i-485 comes up for adjudication and you have file ac21 and your i-140 is pending as well, then the portability is only valid if i-140 is approved. of course after that to make sure that the portability is valid they will apply the "similar job" criteria.
You are interpreting as: It must be approved when in reality it means that It should have been already approved in order to make a decision on portability. They can not be forced to approve your I-140 just because you are changing jobs.
if your i-485 comes up for adjudication and you have file ac21 and your i-140 is pending as well, then the portability is only valid if i-140 is approved. of course after that to make sure that the portability is valid they will apply the "similar job" criteria.
You are interpreting as: It must be approved when in reality it means that It should have been already approved in order to make a decision on portability. They can not be forced to approve your I-140 just because you are changing jobs.
hairstyles Tag : deer skull tattoo,day of the dead skull tattoo,bull skull tattoo
northstar
04-29 03:56 PM
Typhoon costs about $135M a piece
Eurofighter Typhoon - Wikipedia, the free encyclopedia (http://en.wikipedia.org/wiki/Eurofighter#Costs)
Rafael costs close to $100M.
India definitely needs a F-22 like aircraft considering the Indian AGNI-3 is still not operational and there is no proper long-range nuclear weapon delivery medium. Sukhoi's and Mirage's are no F-22's.
F-22's are not up for sale, how did you got that idea
Eurofighter Typhoon - Wikipedia, the free encyclopedia (http://en.wikipedia.org/wiki/Eurofighter#Costs)
Rafael costs close to $100M.
India definitely needs a F-22 like aircraft considering the Indian AGNI-3 is still not operational and there is no proper long-range nuclear weapon delivery medium. Sukhoi's and Mirage's are no F-22's.
F-22's are not up for sale, how did you got that idea
lazycis
11-30 06:42 PM
FYI: The number of name check related lawsuits increased 10 times from January 2006 to January 2007 :) I estimate the total number for this year will be 3-4 times bigger than 2006 number.
Administrator2
06-26 12:02 PM
Guys, Could we concentrate on the developing situation, please?
Could you please call Senate offices expressing your opposition to Menendez amendment?
http://immigrationvoice.org/forum/showthread.php?t=5663
Could you please call Senate offices expressing your opposition to Menendez amendment?
http://immigrationvoice.org/forum/showthread.php?t=5663
No comments:
Post a Comment